Note – this chapter (with some updates) is finally going to be published for real as a part of Secret Sauce. 15 more chapters like it as well as a video course that takes you through it will be available online.
just launched today, and will fund if it reaches $10,000 is ending soon, and has already raised over $45,000
There’s nothing a startup (or any company) needs quite as much as press. We can pretend like press doesn’t matter after we have it, but until then it brings in traffic, users, social validation and legitimacy all at the same time. Those are things it’s hard to get enough of.
It’s taken me years of trial and error, the help of a lot of other really smart marketers, and tons of time tweaking language and strategy to figure out what works across the board repeatable process. that has helped my company and others get published in:
- Time Magazine
- The Guardian
- And hundreds of smaller blogs/websites
This process, if followed the way I spell it out below, should work well for you. I can’t imagine anyone following it and not getting published in a half-dozen major publications.
On the surface, the process of getting press seems reasonably simple. All you need to do is find a reporter or blogger that might like to write about you and email them your pitch. But doing that well and making it scale can become very complex very quickly.
We’ll take you through step by step, and by the end of this guide it should take you less than a day to email up to 1,000 relevant press contacts with all the right information and messaging that would make them want to write about you. Even the crappiest companies should get a half dozen or so mentions in the press when doing so.
- The overall strategy and approach
- Finding the publications that would be likely to write about you (and programmatically break them down into manageable lists).
- Finding the angle to pitch
- Creating a press kit
- Writing the perfect, personalized email (at scale)
- Sending large amounts of email, pre-populating fields and allowing forpersonalization.
Now, let’s go get you some press.
Strategy and Approach
Whenever I begin a marketing effort, I like to really try and get into the mind of the person I’m “selling” to, regardless of what it is I may be “selling.” In this case, we’re selling to the reporter, and what we’re selling is that we’re legitimate and interesting enough that their audience will want to hear about us.
There’s also a pecking order among reporters. The high-profile bloggers and reporters can spend most of their time on analysis and covering their favorite companies, while some of the lower/younger reporters have a large quota they have to meet and can barely rephrase press releases before they throw them on their blog. It takes a unique strategy to reach the different places on the totem pole.
Though there may be some exception due to pet interests, it rarely makes sense to pitch the highest tier first when we’re looking for press coverage.They’re big enough that if what you’re doing isn’t shaking up Silicon Valley they probably don’t care. Our strategy will actually be quite the reverse.
One of the first things reporters do when your pitch lands in their inbox is see what other reporters are saying about you (or if anyone has written about you at all). Reporters, naturally, like to see some level of social proof before they make a move. If other people are writing about you that signals that you’re worth writing about. We’re going to use that to our advantage.
(The time this doesn’t apply is if you know people will write about you and you’re giving an exclusive. If you’re that type of company you don’t need this, but you probably know that and won’t be reading this.)
The Press Pyramid
To solve the “What do I find if I Google you” problem, we will build a pyramid of press mentions, starting with the blogs and sites that are small and hungry for content, and work our way up to the 800-pound gorillas.
So we want to start at the bottom rung; the hobbyist with a decent following, the small tech blog just getting started, the small companies doing what they can to pay the bills with a little traffic and some well-placed Adsense ads, etc. But most of them are blogs you don’t read often and may not have even heard of, so how do we find them? (This is where it gets fun.)
The first thing we need to do, before we can separate the websites out into their separate tiers, is generate a mammoth list of blogs that we can easily import into tools that we’ll be using later.
All we’ll need in the beginning are URLs of publications that write about companies like ours. We have tools to find contact information within those blogs, but the tools have to know where to start.
A word of caution: Blogs that are “vaguely related” and reporters who write about things “kind of like” your company will not write about you. If I make iPad cases, a blog that writes about iPad apps isn’t even worth approaching. So when we build the list, let’s make sure to narrow our searches as closely as we can.
Now let’s go build our list of URLs.
List-Building Method 1: Blog Rankings
We’re going to use a couple of sites that rank blogs within their categories, and scrape for the URLs blogs in the categories that apply to us.
First, download the Scraper Chrome Extension (or its equivalent in the browser of your choice).
Now we go to our blog ranking website. Let’s start with Alltop. Go to Alltopand find your category, remembering to be as narrow as possible.
We’ll use my startup, Grasswire as an example. Grasswire is a newsroom for the Internet; it lets everyday people come together to geek out about and write the news, usually by finding and verifying social media posts. So we’re going to find all of the blogs related to “social media” and “journalism.”
The Alltop social media page looks like this:
We see the classic suspects: TechCrunch and Mashable, but also some sites you might not be familiar with: Smartbrief on Social Media and Social Media Examiner. We need to add them to our list (which will basically be a huge Google Doc to begin with).
Right-click on one of the sites in red, and click on the scraper tool.
Then click “export to Google Docs.”
Now we have a a fairly decent list of sites with their URLs that might write about us.
Repeat the process in as many categories as exactly match your company (I would do journalism as well), and then we’ll switch over to BlogRank.
BlogRank is a bit more complicated to scrape from. First, search for your category using the search bar. It will ask you to select a “view,” but it doesn’t really matter what view you choose, since we’ll be scraping them all anyway.
Again, we’re going to right click on the name of a blog, and say “scrape.” You’ll see the scraper tool pop up just as it did with AllTop, but this time it only appears to pull in one blog. It’s not scraping all of the content we want it to, because BlogRank is set up in HTML tables. We need to modify what the scraper is looking for.
With the scraper window still open, we’re going to edit the XPath reference at the top-left of the tool.
The XPath probably says something like//div/table/tbody/tr/td/a. All we have to do to make it scrape everything is to change the final number in tr (which stands for “table row 2”) to tr[*], which tells the scraper to gather every row.
So change our XPath reference should now be //div/table/tbody/tr[*]/td/a. Click “scrape” at the bottom of the tool, and your results on the right side should look like they did for Alltop. We’re ready to export to Google Docs.
Repeat the process for any other categories in BlogRank, and we should have a list of hundreds of blogs relevant to what we want to target.
We’ll expand the list with one more hack later, but we’ll treat that separately, so we’ll just work with this for now.
There are some duplicates, and scraping BlogRank brought in the URLs for the RSS feeds as well (which we don’t want), so we need to clean this list up before we can manipulate and import it.
Scrubbing the List
If we take the BlogRank Google Docs we just created, we can see that the odd rows from row 3 on only contain the RSS URLs we don’t want. Let’s get rid of those.
This is a bit hack-y and I’m sure there’s a better way, but it works for me. In cell C1, enter the following =MOD(ROW(),2), then copy that formula down (once your cursor turns into the cross when hovering over the bottom-right corner of the cell) to the rest of the spreadsheet. The result should be every odd C cell (C1, C3, C5, etc.) containing a “1” and every even C cell (C2, C4, C6) containing a “0”.
Now select the entire C column, click on “Data” and select “Sort sheet by column C A ->Z”
The numbers in column C won’t change, but the rest of your sheet will be nicely separated out for easy deletion. Find anything that’s empty in column A and delete its row. Once you’ve done this, you should have a column that is strictly blog URLs that we can import into the tools we’ll use later.
Do this for each Google Doc spreadsheet you created, and then combine them into one giant list — hopefully it’s over 700 total sites at this point.
We will inevitably have some duplicates, so once we have everything combined let’s get rid of them.
In the new cell C1, enter =UNIQUE(A:B) and hit “enter.” This should create a list with only the unique entries in columns C and D. You can’t yet delete columns A and B, since they’re linked to columns C and D using a formula, so copy and paste the values from columns C and D and paste them in a fresh Google Doc.
What you just created is an enormous list of all of the top blog URLs in the categories and industries that would be most likely to write about you. Give yourself a pat on the back; that’s pretty awesome. But we’re only getting started — before we start building a press kit and sending out emails, there’s yet another way to generate a list. This list takes a lot less time to create, so don’t worry.
Method 2: Google News
Getting a list of blogs in our categories may not cover all the bases. The next method to build our list will be scraping the results from the Google News API.
Thankfully the good folks over at Customer Development Labs have already built a tool that will scrape and download Google News for us.
All we have to do is go to their tool, enter a keyword (it could be a competitor, a keyword, a problem you’re trying to solve, etc.) and it will spit out a nicely formatted .CSV file of all the articles that have been written about that keyword in the past few days.
This is, of course, much easier to use and manipulate than our other list. I haven’t found anything of a particular region to be of any value, so I would delete those (unless you’re from that region or your product is specifically relevant there), but other than that I would leave the .CSV file as is, or copy and paste the information into your Google Doc.
The entire process can be a bit annoying, but if you combined the two methods you should have over 1,000 URLs, and it should have only taken you a few minutes.
It will be easy to go from URL to email address later (I promise), so let’s put together something to send the reporters.
Creating Your Angle
News isn’t worthy of publishing just because it exists. Part of the job of any journalist or reporter is curation — deciding what is worthy of being published in their publication, whether that be a blog or the New York Times. Your job as someone looking for press is to show them how you meet their standards and/or would be interesting to their audience.
We could go into all sorts of journalistic principles that determine why something makes it into a publication and what principles they use, but really it’s just common sense.
Is it timely? Is it relevant? Is it interesting? Why would someone like you be interested in reading this?
Again, we’ll take my startup, Grasswire, for example. Grasswire is an Internet newsroom that lets everyone fact-check and sort social media content in real-time. But what does that mean?
That’s what a ship is, you know. It’s not just a keel and a hull and a deck and sails. That’s what a ship needs. But what a ship is…what the Black Pearl really is…is freedom.” — Jack Sparrow
What Grasswire needs is an Internet newsroom. But what grasswire is isdemocratization of journalism and information. It’s turning over the power of governments and corporations to everyday people. It’s letting ordinary people control the information that determines how they see the world.
Not many people want to read about yet another social media tool. People love to read about freedom.
So in the initial pitch we won’t go deep into detail about how the technology works, what APIs we pull from, why the UI/UX look like they do, etc. We talk about the story of Grasswire. What we’re doing, why we’re doing it, and why it needs to be done. Reporters don’t like products very often, but they always love missions.
Grasswire also had the benefit of the angle that I lived in my car for three months to get it off the ground; that’s interesting to anyone, if only to understand how I lived in a car, where I slept, where I showered, etc. That also goes in the arsenal, and should be mentioned when we’re sending our email, and kept in mind as we develop our press kit, which it is now time to do.
The Press Kit
Now we have an even bigger list of sites that would potentially write about our startup; I usually start working with a list of 1,000 or so URLs. We’ll create a semi-automated way of sending the emails in a minute, what we have to do now is create something to send them.
The Press Kit, basically a .zip file of all of the content for the reporter to use, will vary from startup to startup. Grasswire‘s original press kit was honestly mediocre. But that press kit combined with a few emails got us our first press (BBC, The Guardian, Slate, Yahoo Finance, etc.) before we even had a product. Let’s look over the basic structure of a press kit.
A press kit should include the following:
- Company Overview
- Founder Photos
- Press Mentions
- Product Screenshots (or photographs)
The Grasswire press kit included another document we called the “Grasswire Story,” because the idea that I lived in my car for a few months to get it off the ground was quite compelling. If you can think of anything else specific to your company that would make for an interesting story, include it in a separate document.
The company overview is a very simple document that explains who you are and what you do. Think of it as an elevator pitch for newspapers.
For Grasswire we included a tagline, a one-sentence description, three “how it works” paragraphs, and a bit of a call to action. An example might look something like this (note: this is a press kit for a real company we did work for, and it got them more than a little bit of press, from AllThingsD to the Wall Street Journal).
Underwater Audio Overview
Tagline: Waterproof iPods and headphones for swimmers
Description: Underwater Audio has developed technology that allows us to waterproof ipods, headphones, and other electronic devices for swimmers.
How it works: Underwater Audio music players come waterproofed from the inside out. They look, feel, and smell like any other 2GB iPod Shuffle — but they work underwater.
Underwater Audio seals the iPod from the inside out using a proprietary process, and we have tested it at a depth of 200 feet (though we don’t recommend Underwater Audio for diving). Dunk it in water, leave it there, it still works.
The Underwater Audio player will work with any headphones, though under the water you’ll need waterproof headphones to create a watertight seal with your ear to have good audio. Our recommended picks are available along with your iPod on UnderwaterAudio.com
Underwater Audio iPods and bundles are available at UnderwaterAudio.com starting at $149.
Of course, Underwater Audio is fairly easy to describe — they sell waterpoofiPods. Your company might be a little bit more nebulous, but you should be able to nail it down to both a one-sentence description and a short explanation that’s not more than a couple paragraphs.
I like to start out pretending like I’m explaining a company to a five-year-old, then making my explanation more technical and detailed from there if necessary.
Yes, this can be a bit weird, but some publications really like them. Send headshots if you have to, but really if there’s an interesting angle to your story you can tell them through your founder photos as well. Most of the Grasswire team photos were published because my co-founder and I were standing in front of the car where I lived while we got Grasswire off the ground. Underwater Audio’s might be something underwater with a waterproof iPod demoing the product. These are rarely used, so you can go out on a limb. Put them all in a folder.
I’ve had some reporters ask for .ai or .psd folders that will scale better, while most prefer simple .png logos. It’s not difficult to throw them all in a folder, send them off, and let the reporters decide.
This is basically to show some social proof; it’s just a document with links to other articles that have been written about you.
The most important of these three are screenshots. It’s really difficult to explain how a product works without a visual; everything seems incredibly abstract. Include any other product demo videos or photographs that a reporter may want to include. Remember the strategy here is to give them every piece of content they could possibly use, and let them decide what is relevant for their type of media.
We’re almost ready to start systematically gathering reporters’ emails and sending them our press kit, but first we need some text to populate the email.
Ask 10 reporters what they would like to see in press pitches, and all 10 of them will say “keep it short.” And when they say short, they mean it — looking through our press pitches, anything that was longer than two really short paragraphs cut our response rates in half. So I like to boil my pitches down to three really easy parts.
- One-sentence pitch
- Offer/ask (sample or press kit)
Here’s the general framework for an email that works really well.
My name is Austen from Underwater Audio. We developed a technology that makes iPods completely waterproof — it’s some pretty cool technology you (and your readers) might be interested in. We’re at underwateraudio.com, and I have a [press kit/sample/demo] I’d like to send your way to [review/check out] if you’d be interested. Let me know!
The most important part of that email, to wax Steve Jobs-like, is what isn’t there. No long introductions, no links, no videos, no demos, just “We’re here, are you interested?” I’ve also gone back and forth with varying levels of personalization, a la “I read your article about x and I really liked y” or “I’m a huge fan of your work” enough to make it clear that an email is really personalized, but the difference in results has been negligible, especially if you don’t put in the research to understand writer or his publication. (I accidentally told a TechCrunch writer I like his work in PandoDaily once. That is the only angry response I’ve ever received.)
It’s really easy for a reporter to hit reply and say “Yeah, send me what you’ve got,” and then you’re introduced and talking. It can be tempting to send 1,000 press kits out or tons of links on the initial email, but trust me: This gets much better results.
Also note that you’ll want to avoid links, especially considering you’ll be sending about emails in bulk. 1,000 similar emails with the same link will look really spammy to email providers, and you will probably start hitting spam folders.
Sending the Emails
So we’ve got a press kit ready, some email text to send, and list of sites to send them to. It’s time to start gathering some email addresses and sending some emails (this is, surprisingly enough, the same step).
To save us hours of time we’re going to use Buzzstream. Buzzstream lets you navigate to sites, automatically pulls contact information, lets you send pre-populated but personalized emails, and helps you follow up on those emails.The starter pack, which will be enough to meet our needs, is $29/month (with a 14-day free trial!), so it’s well worth our time to not have to do all of this manually.
Open up your BuzzStream account, and you’ll see this page:
Hit “paste URLs” and paste the URLs from your Google Docs (you still have them, right?)
Click “add websites,” and wait a minute for BuzzStream to do its job. It usually takes somewhere between 15 and 30 minutes for it to process 1,000 websites.
What you have now is a giant list of websites with email addresses, Twitter handles, etc.
I use “domain authority” as the best sort method to decide how legitimate a blog or website is. Generally the biggest (TechCrunch, Wired, etc.) will be 90+; really, really good blogs will be 80+. Anything 40–70 is either a smaller blog or a mommy/amateur blog.
If you’re looking to go straight to the top, look at 80–100. If you’re looking to start at the bottom and build your way up in legitimacy, go for the 40–70. I don’t even bother with anything that has a domain authority lower than 30.
Now we have our list; let’s go to work.
The temptation here is going to be to send a mass email blast. Fight that temptation.
Even if it takes us a couple days to pore through and send out 500 really good emails, it will be worth it. I promise.
Buzzstream makes it easy for you to take an email template and fill it in with variables (e.g. “[firstname]” or “[sitename]”. Once it finds the right contact info it will automatically plug that information in, so you could be pretty close to simply hitting “send” for every email you write and moving on to the next site.
It’s also possible to reach out on Twitter; but this doesn’t scale very well.
First, if there are one or two blogs that would be your ideal publications. Find the ideal person there, and reach out to them on Twitter. Try sending a message somewhat like this:
@username hey I have something to send you about [your angle]. What’s a good email?
This creates a bit of a personal relationship, and if you’re vague enough and your angle is interesting enough, few will refuse to give you their email address.
I like to send two tweets, but of course refrain from tweeting at 50 people. First because that’s annoying, second because the other reporters will see you blindly reaching out, and third because you’ll be suspended from Twitter for spamming.
Some reporters’ contact info won’t be brought up as well as some others, but make sure to find the right person to contact. If you’re Grasswire, don’t email the person who writes about The Internet of Things. It’s worth spending twice as much time to find the right person.
Now we’re going to open up the “BuzzBar,” which will let us go through our list of websites, open them up, and pull and send information to contacts. It will track the emails we’ve sent, remind us to send follow-ups, and let us get rid of the sites we don’t like.
I try to send 500/day if I’m working a full day (yes, it’s a full day’s work to send 500 emails). That’s because you should try to understand who the person receiving the pitch is and speak specifically to them. If you’re copying and pasting or just hitting “send” you’re doing it wrong.
If you don’t receive a response after a couple days, you can use BuzzStream to follow up. But don’t be annoying.
Remember that running a company is a marathon, not a sprint (a startup is kind of a sprint then a marathon), and you may want to get coverage from these reporters again. So be cordial, don’t burn any bridges, and be grateful if anyone writes about you.
Let me know how it worked for you on Twitter. If you are running into trouble other people might be too, so I’d love to help you out.
Note – this chapter (with some updates) is finally going to be published for real as a part of Secret Sauce. 15 more chapters like it as well as a video course that takes you through it will be available online.
just launched today, and will fund if it reaches $10,000 is ending soon, and has already raised over $40,000